Victron Solar charge controllers

Low cost PWM controller.10 amps at 12 volt or 24 volt

Internal temperature sensor.

Three stage battery charging (bulk, absorption, float).

Protected against over current.

Protected against short circuit.

Protected against reverse polarity connection of the solar panels and/or battery.

With low voltage load disconnect output

PWM controller.20 amps at 12 or 24 volt

 C harges two separate batteries. For example the starter battery and the service battery of a boat or mobile home.

Programmable charge current ratio (standard setting: equal current to both batteries).

C harge voltage settings for three battery types (Gel, AGM and Flooded).

 I nternal temperature sensor and optional remote temperature sensor.

Protected against over current.

Protected against short circuit.

Protected against reverse polarity connection of the solar panels and/or battery

Maximum Power Point Tracking (MPPT) controller. Increases charge current by up to 30% compared to a PWM controller.

40 AMPS AT 12 VOLT OR 24 VOLTS

Charge voltage settings for eight battery types, plus two equalize settings.

Remote temperature sensor.

Protected against over current.

Protected against short circuit.

Protected against reverse polarity connection of the solar panels and/or battery.

With low voltage load disconnect output