Victron System Control Panels

This panel is intended for Phoenix inverters equipped with a UTP remote monitoring and control socket. It can also be used on a MultiPlus inverter/charger when an automatic transfer switch but no charger function is desired. The brightness of the LEDs is automatically reduced...[more]

An excessively high or low battery voltage is indicated by an audible and visual alarm, and a relay for remote signalling.

E-Plex The demand for luxury and comfort on boats and vehicles grows every day. Unfortunately, more luxury and comfort means a larger web of wiring and...[more]

The Skylla Control allows you to alter the charge current and see the system status.

The PCC panel provides remote control and monitoring of the charge process with LED indication of the charger status. In addition, the remote panel also offers output current adjustment that can be used to limit the output current and thus the power drawn from the AC supply. This is particularly useful when operating the charger from limited shore power or small gensets. The panel can also be used to change the battery charging parameters. The brightness of the LED's is automatically reduced during night time. Connection to the charger is with a standard UTP cable.

The new ESP Panel System provides a contemporary designed range of panels that cover the core engineering systems. The main system panel is the heart of the range. This provides AC and DC monitoring, MultiPlus control and backligth control. Additional panels include AC and DC circuit breaker panels and a general control pan, a VE.Net panel.

The system panel acquires its AC voltage and current from the ESP PowerMan. The ESP PowerMan provides automatic switching between shore power, generator and a MultiPlus. In addition, high load circuits are disconnected when only inverter power is available. The ESP PowerMan is available in a 20A, 32A and 64A 230VAC version.

VE Interface MK.2B Phoenix Inverters are ready to communicate with a computer through its RS-485 data port. All you need to link to your PC in order to be able to set and read out all parameters is the data link as shown. Moreover, all Victron Energy products equipped with an RS-485 data port, such as VE.Net, can easily be integrated in a computerized monitoring and control system. Only for models: 12/1200, 12/1600, 12/3000, 12/5000, 24/1200, 24/1600, 24/3000, 24/5000, 48/3000, 48/5000 VE-Configure software and a RJ45 UTP cable required.

This panel is intended both for Multi's and Quattro's. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore-side current for example.
Variable setting range (with the rotary knob): up to 16 Amps (VE.Bus Multi Control 16/200A panel) or up 30 Amps (VE.Bust Multi Control 30/200A panel).
Fixed setting range (for both models): 200 Amps.
The brightness of the LED's is automatically reduced during night time.

This panel is intended both for Multi's and Quattro's. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore-side current for example. Fixed setting range (for both models): 200 Amps. The brightness of the LED's is...[more]