Victron Multiplus inverter / charger 3000 watt output

Description

Send to friend

Reviews

Phoenix MultiPlus Compact 12 / 24 Volt

Multi-functional
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 3000VA per module.

Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually unlimited power thanks to parallel operation
Up to 6 Multi's can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.

Related products

	VE Interface MK.2B Phoenix Inverters are ready to communicate with a computer through its RS-485 data port. All you need to link to your PC in order to be able to set and read out all parameters is the data link as shown. Moreover, all Victron Energy products equipped with an RS-485 data port, such as VE.Net, can easily be integrated in a computerized monitoring and control system. Only for models: 12/1200, 12/1600, 12/3000, 12/5000, 24/1200, 24/1600, 24/3000, 24/5000, 48/3000, 48/5000 VE-Configure software and a RJ45 UTP cable required.
	Digital Multi Control 200/200A This panel is intended both for Multi's and Quattro's. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore-side current for example. Fixed setting range (for both models): 200 Amps. The brightness of the LED's is automatically reduced during night time.
	Phoenix Multi Control This panel is intended both for Multi's and Quattro's. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore-side current for example. Variable setting range (with the rotary knob): up to 16 Amps (VE.Bus Multi Control 16/200A panel) or up 30 Amps (VE.Bust Multi Control 30/200A panel). Fixed setting range (for both models): 200 Amps. The brightness of the LED's is automatically reduced during night time.
	Battery Alarm An excessively high or low battery voltage is indicated by an audible and visual alarm, and a relay for remote signalling.
	RJ45 UTP Cable Allows to connect Phoenix Inverter Control or VE Interface MK2b. 5M ASS030065000 10M ASS030065010 15M ASS030065020