Wind Turbines 
Wind Turbines
Samrey Wind Turbines manufactured in England and supported in Ireland by JTM POWER
The wind turbine location is a very important factor in the overall performance of your wind turbine system. Good site selection will maximise the power that your wind turbine will be able to deliver.
Installing a wind turbine in a bad position is similar to installing a solar panel system in the shade – it will not maximise the performance of your investment in the wind tubine.
The total amount of energy available in the wind increases dramatically with small increases in wind speed, therefore it is very important that you site your Samrey Wind turbine in the best possible position.
All wind turbines Prices are supply only Please contact JTM and we may have an installer in your area whom can Quote for installing your Samrey wind turbine. Samrey Wind Turbines are supplied with comprehensive instructions for DIY installation
If you would like further information on becoming an installer or distributor contact sales@jtm.ie
At JTM Power, we stock a wide range of wind turbines. Take advantage of our low low Internet prices today. Browse through our range of wind turbine products below. Purchasing your wind turbine could not be any easier - click on the 'add to cart' button and pass through our simple and secure checkout process.
Prices displayed do not include Vat
Wind Turbine Information
Information Electricty Supply Board connecting wind turbines
Wind Turbine FAQ
CODE: power predictor
Price : €145.00
Is renewable energy right for you? Trying to choose between Wind or Solar? Then you need the Power Predictor.
This product will not only log wind speed and direction data, but also counts the number of hours of sunshine. The Power Predictor includes a solar radiation sensor, wind direction vane, and wind speed measuring anemometer.
Click Power Predictor for more information
CODE: wren tower kit
Price : €165.00
- Easy to erect and installs in minutes
- High quality galvanised and powder coated components
- Suitable for use with the Wren Micro-turbine
- Maybe used for towers up to a maximum height of 7.5m
- Suitable for temporary or permanent installations
- Can be used with a variety of ground and soil conditions.
- No concrete or cement required (for certain types of installation)
- Designed for use with low cost and readily available 48mm Outer Diameter tube (not included)
- No winch or 'gin-pole' required
CODE: wren wall mounting
Price : €130.00
This wind turbine wall mount kit is:
- Designed to mount the Wren Micro-turbine to an existing structure
- Complete with anti-vibration materials to prevent transmission of vibration and noise
- Heavy duty steel, powder coated for corrosion resistance
- Maximum pole length above upper bracket.
- 48mm Outer diameter tube required
CODE: Wren Turbine
Price : €580.00
- Samrey Wren Micro Wind Turbine - 1 metre rotor – 300W max output – 5.5kgs.
- The Wren embraces the Samrey principals
- The best price/ performance available currently
- Optimised for low wind speed generation
- Designed specifically as a wind turbine - no adapted or modified parts
- Samrey wind turbines are designed and manufactured in the UK
- High quality materials used throughout.
CODE: wren grid tie package ga-pkge-00
Price : €1,598.00
Substitute home grown energy for that bought from an electricity supplier.
Designed for connection to the national grid and utilising the Samrey Wren wind turbine to generate a portion of a households mains electricity demand.
This package contains:
Samrey Wren Wind Turbine max output 300 watts
Building or Tower kit
Windmaster 500 optimised GTI inverter
Run/Stop Switch box and fuse
10m 2.5mm2 cable
6.5mm & 13mm drill bit.
Please Confirm Tower Kit / building kit. and 12 volt or 24 volt
CODE: Mistral Gt turbine
Price : €5,250.00
New Down Wind Turbines now available
The Samrey Mistral Grid Tie packages include a Mistral wind turbine, a free standing tower, control unit and grid-tie inverter (optimised for use with the Mistral).
The Samrey Mistral down wind turbine is currently the middle wind turbine in our product family with a rotor diameter of 1.8 meter and a maximum power output of over 1 kW.
The wind turbine produces high voltage 3 phase AC output to minimise transmission losses that go, via a Control Unit, to an optimised grid-tie inverter.
Estimated Annual Output = 750 - 1400 kwh
The wind turbine is mounted on a Free-standing tower.
Warranty 2 years
Click view details for full details on components included in the Samrey Mistral 1Kw grid tie package
CODE: merlin turbine g/t
Price : €7,700.00
New Down Wind Turbines now available
The Samrey Merlin wind turbine is currently the largest wind turbine in our product family with a rotor diameter of 3.0m and a maximum power output of over 2.5 kW.
The Samrey Merlin wind turbine conforms to our design philosophy of which excellent performance at low wind speeds .
The wind turbine produces high voltage 3 phase AC output to minimise transmission losses that go, via a Control Unit, to an optimised grid-tie inverter.
The wind turbine is mounted on a 10m Free Standing Tower
Estimated Annual Output = 2000 - 4500 kwh
Warranty 2 years
Click view details for full details on components included in the Samrey Merlin 2500 grid tie package
CODE: wren medium package GA-PKGE-002A
Price : €1,155.00
Samrey wren wind turbine designed for applications that have a regular and higher demand such as static caravans, off-grid dwellings, large electric fencing systems, permanent and semi permanent application demand such as remote monitoring, data-recording and signage, agricultural and horticultural applications, and with PV panels as part of hybrid systems.
The package contains:
Samrey wren wind Turbine 300 watt output
Building or Tower kit
45 Amp Diversion Controller
500 watt Dump Load
Run / Stop Switch box and fuse
10m 2.5mm2 cable
6.5mm & 13mm drill bit.
Inverter - 600W Quasi-sine wave
Please Confirm Tower Kit / building kit. and 12 volt or 24 volt
CODE: Minstral 1kw b/c
Price : €2,999.00
New Down Wind Turbines now available
The Samrey Mistral battery chargeing wind turbine packages include a Mistral down wind turbine, a choice of tower, power conditioning unit, diversion controller and dump load.
Available in 24 and 48 VDC
Although a 12V system is available by special order.
Samrey Mistral wind turbine – summary
1.8 m diameter 3 blade glass reinforced nylon
300w output at 8 m/s
850w output at 12 m/s
120 VAC 3 phase native output voltage
Available with 10m Guyed or Free-stand
Warranty 2 years
CODE: Merlin Turbine B / C
Price : €5,900.00
New Down Wind Turbines now available
The Samrey Merlin battery chargeing packages include a Merlin wind turbine, a choice of tower, power conditioning unit, diversion controller and dump load.
Available in 24 and 48 VDC
Samrey Merlin Wind Turbine
3.0 m diameter 3 blade glass reinforced nylon
1,100w output at 8 m/s
2,500w output at 12 m/s
230 VAC 3 phase native output voltage
Available with 10m Guyed or Free-standing tower.
Confirm either 24 or 48 VDC and tower option.
Warranty 2 years
Samrey wind turbines
